Bnc 7000 Series User Manual Manual de usuario descargar pdf (Pagina 52)

7 Maintenance and Warranty Information

7.1 Adjustments and Calibration

To maintain optimum measurement performance, the SERIES 7000 should be calibrated every

24 months. It is recommended that the SERIES 7000 be returned to Berkeley Nucleonics or to an

authorized calibration facility. For more information please contact our Customer Service Department

at support@Berkeley Nucleonics.com

or through our website.

7.2 Repair

The instrument contains no user-serviceable parts. Repair or calibration of the SERIES 7000 requires

specialised test equipment and must be performed by Berkeley Nucleonics or its authorized repair

specialists.

7.3 Upgrading the Firmware via LAN

It is recommended to regularly check for new firmware for the SERIES 7000. If new firmware is

available, it can be downloaded from the Berkeley Nucleonics website and locally stored. Then, it can

be uploaded directly to the instrument via Device  Upload Firmware

7.4 Safety

FCC notice

This equipment has been tested and found to comply with the limits for a Class A device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area may cause harmful interference. In which case the

user will be required to correct the interference at his or her own expense.

notice

The SERIES 7000 meets the intent of the EMC directive 89/336/EEC and have been designed to

EN61326 Class A Emissions and Immunity standard.

Berkeley Nucleonics Corporation 2955 Kerner Blvd., San Rafael, CA 94901

Phone: 415-453-9955, Fax: 415-453-9956, Email: [email protected], Web: www.berkeleynucleonics.com

1 2 ... 47 48 49 50 51 52 53 54

Sin comentarios

Bnc 7000 Series User Manual Manual de usuario Pagina 52