Bnc 1621M Manual de usuario descargar pdf (Pagina 18)

To use the dosimeter in data transmission to PC mode:

• Read and follow the recommendations of the  le Read_me.doc on

the CD supplied with IR adapter;

• Read the help  le Help_ 1621.doc;

• Connect the adapter of IR communication channel to a PC COM port;

• Install the IrDA communication unit and switch on the IR connection;

• Install the program “System of Data Collection and Processing for the 1621/

1603/1604 Devices” from the CD, (run the program \DISK1\SETUP.EXE);

• Run the program 16XX.EXE;

• Read the help section of the program “System of Data Collection and

Processing for the 1621/ 1603/ 1604 Devices”;

• Orient the dosimeter and adapter of IR communication channel of the

PC by placing the dosimeter at a distance of 10-20 cm from the IR

channel adapter;

• Choose the mode of data transmission to PC using the MODE button

• Press and release the LIGHT/SET button for PC link startup through

IR channel;

• Perform readout of the dosimeter’s information following the program’s

instructions.

In data transmission to PC mode, the dosimeter provides the following functions:

1. Permission or prohibition of the following operating modes

(parameters) of the dosimeter:

• DER indication;

• Indication of DER coef cient of variation;

• Indication of DER averaging time;

• DE indication;

• Indication of DE accumulation time;

• Indication of time remaining for stay at the working place depending on

the current measured DER and DE values;

• Indication of the dosimeter s number;

• Audible alarm;

• Preset of the DE and DER threshold levels using the buttons;

• DE reset using the buttons.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 26 27

Sin comentarios

Bnc 1621M Manual de usuario Pagina 18