Bnc 835 Programmer Manual Manual de usuario Pagina 23

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 65
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 22
Berkeley Nucleonics Corporation 2955 Kerner Blvd., San Rafael, CA 94901
Phone: 415-453-9955, Fax: 415-453-9956, Email: [email protected], Web: www.berkeleynucleonics.com
5.2 :INITiate Subsystem
The :INITiate subsystem controls the state of the BENCHTOP MICROWAVE SOURCE trigger system.
The subsystem commands and parameters are described below. The :INITiate commands, along with
the :ABORt and :TRIGger commands, comprise the Trigger Group of commands.
Command
Parameters
Unit
(default)
Remark
:INITiate[:IMMediate]
ON
:INITiate:CONTinuous
ON|OFF|1|0
OFF
:INITiate[:IMMediate]
Sets trigger to the armed state.
:INITiate:CONTinuous ON|OFF|1|0
Continuously rearms the trigger system after completion of a triggered sweep.
Vista de pagina 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 64 65

Comentarios a estos manuales

Sin comentarios