BNC 575 Series Especificaciones Pagina 23
- Pagina / 63
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
6-23
Recall Menu (FUNC + RECALL key)
Configuration #
Name
Help Line
Recalling System Configurations
Use the following procedure to recall a stored or default system configuration:
Enter the Recall Menu (FUNC + RECALL).
Select a configuration number.
From the Recall Menu, press the recall key sequence (function + recall).
*Note: Configuration 0 is the factory default setting.
Counter Menu (FUNC + AUX1 key)
Counter Enable
Counter Enable
T Counts
T Counts
G Counts *
Help Line
Help Line
* Enabled when the Trigger Mode is set to Dual Trigger operation
(Instrument must be equipped with the Dual Trigger Option. Visit
www.berkeleynucleonics.com for more details).
Using the Counter Function
The Counter function counts the number of T
0
pulses output by the system clock.
When the unit is operated in system single shot mode, the T
0
count reflects the
number of incoming trigger pulses.
Information Menus (FUNC + 0 key)
Information Menu A
Model Number
Serial Number
Firmware Ver.
FPGA Ver.
Information Menu B
FW ID #
GA ID #
Module IDs
Instr. Options
The Information Menus provide all of the pertinent version numbers and serial
numbers for the unit. This information should be readily available when
contacting customer service for troubleshooting help.
- 1 Table of Contents 2
- 2 Introduction 6
- 3 Safety Issues 7
- 4 Front Panel Overview 8
- Rotary Adjustment Knob 9
- Operations 10
- Channel Timer Functions 11
- Digital Output Multiplexer 11
- Selecting Menus 12
- Selecting Menu Items 12
- Numeric Input Mode 12
- Alphanumeric Input Mode 13
- Enabling System Output 13
- Rearming the Channel Timers 13
- Period 15
- 6 575 Menu Structure 16
- “Pulse Inhibit” method 19
- “Output Inhibit” method 19
- Trigger Menus (TRIG key) 20
- Gate Menus (GATE key) 20
- Enabling System Gate 21
- Communication Interface Menu 21
- User Options Menu 1 21
- Setting Keypad Parameters 21
- User Options Menu 2 22
- Setting the Auto Start Mode 22
- Storing a Configuration 22
- Using the Counter Function 23
- Information Menu A 23
- Information Menu B 23
- 7 Operating the 575 24
- System Timer Overview 25
- Channel Timer Overview 26
- External Input Overview 28
- 8 Programming the 575 31
- USB Interface Overview 32
- GPIB Interface Overview 32
- Ethernet Interface Overview 32
- Line Termination 33
- SCPI Command Format 34
- SCPI Optional Keywords 35
- SCPI Parameter Types 35
- Error Codes 35
- Example 1) 36
- Example 2) 36
- IEEE 488.2 Common Commands 41
- INTERNAL RATE GENERATOR 42
- OPTICAL OUTPUTS 44
- OPTICAL INPUTS 44
- EXTERNAL CLOCK IN/OUT 44
- GENERAL 44
- OUTPUT MODULES 45
- INPUT MODULES 45
- Safety Marking Symbols 46
- Appendix C - COM Option 49
- DT15 Overview 51
- DT15 Menus 51
- DT15 SCPI Command Summary 52
- AT35 Description 53
- AT35 Specifications 53
- Output Module) 54
- Increment Overview 55
- Increment Menus 55
- Increment Specifications 56
- AT45 Option Overview 58
- AT45 Channel Menus 58
- AT45 Specifications 59
- 60
- Figure 3 (Low Z 5V) 61
- Figure 4 (Low Z 45V) 61
Sealife Flashes de las cámaras manuales de usuario
La lista de productos de Sealife Flashes de las cámaras contiene 11 manuales de usuario para 4 seleccionados. Todas las guías de usuario en pdf están disponibles para descargar o ver en línea.
Comentarios a estos manuales