BNC 575 Series Especificaciones descargar pdf (Pagina 41)

8-41

575 DISPlay Commands (SCPI Command Summary)

Keyword

Parameter

Comments

:DISPlay

Subsystem. Contains commands to control

the display.

:MODe

0/1 or ON/OFF

Enables/Disables automatic display update.

When true, front panel display is updated

with serial command parameter changes.

Setting to false decreases response time.

:UPDate?

Query only. Forces update of display. Use

when mode is false.

:BRIGhtness

0-4

Controls intensity of display. Range is 0 to 4,

where 0 is off and 4 is full intensity.

:ENABle

0/1 or ON/OFF

Enables/Disables the display and front panel

lights. When Disabled the keylock is enabled

to prevent parameter changes from the front

panel.

IEEE 488.2 Common Commands

Keyword

Parameter

Comments

*IDN?

Identification

Query

Queries the Pulse Generator Identification.

The ID will be in the following format:

manufacturer,model#,serial#,version#

*RCL

0-12

Restores the state of the Pulse Generator

from a copy stored in local nonvolatile

memory (0 through 12 are valid memory

blocks).

*RST

Reset Command

Resets the Pulse Generator to the default

state.

*SAV

1-12

Stores the current state of the Pulse

Generator in local nonvolatile memory (1

through 12 are valid memory blocks).

*TRG

Trigger

Generates a software trigger pulse.

Operation is the same as receiving an

external trigger pulse.

*LBL

Setup Label

Query Form returns the label of the last

saved or recalled configuration.

Command Form sets the label string for the

next "*SAV" command. String must be in

double quotes, 14 characters max.

*ARM

Channel Trigger

Reset

Resets channel triggers when channels are

set to single shot or burst mode. Functions

like pressing the function then run/stop

button.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 62 63

Comentarios a estos manuales

Sin comentarios