Bnc 1201 - 6 1/2 Digit Digital Multimeter Manual de usuario descargar pdf (Pagina 77)

locate “TRIG” option. Press ENTER to select it. Then again find “DELAY”

option using ◁ and ▷ buttons. Press ENTER to select it. Then use ◁

and ▷ buttons to move through the digits and △ and ▽ buttons to set

the desired delay time (between 0 to 3600 second). The locations of the

buttons are shown with red rectangle frames in Figure 4-13.

Figure 4-13

Remote Interface Operation

You can also use the remote interface operations from your PC terminal

to set the trigger delay. To select a delay time, use the following

command or set the trigger delay to be automatic:

TRIGger:DELay {<seconds>|MINimum|MAXimum}

TRIGger:DELay:AUTO {OFF|ON}

4.3 Math Operations

This section will introduce the mathematical operations in 1201. There

are eight math operations: RITIO, %, Min/Max, NULL, Limits, MX+B,

dB and dBm testing. They either store data for later use or perform

mathematical operations on the readings. Note that these math

operations are available to all measurement functions except continuity

and diode testing.

※ Note: The “MATH” anunnciator on the display indicates the state of a

mathematical feature, excluding Ratio, and will be lit by enabling

whichever math feature. Also, press the same buttons again for the

enabled math feature will disable the same math feature.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 176 177

Sin comentarios

Bnc 1201 - 6 1/2 Digit Digital Multimeter Manual de usuario Pagina 77