Bnc 1105 Universal Counter Manual de usuario descargar pdf (Pagina 107)

107

107107

107



When using ASCii format, numeric data is transferred as ASCII bytes in <NR3>

format. The number of significant digits will range from 1 to 15, depending on the

measurement resolution. Only significant digits will be returned.



If there is no valid result, error -230 will be generated and 9.91E37(Not A Number)

will be returned.



If Totalize or Voltage Peaks are chosen, error 0221 will be generated and

9.91E37(Not A Number) will be returned.

Notes



If this command is sent when a measurement is in progress, the results will not be

available until the measurement is completed, and it also holds off the subsequent

commands unless there is a device clear or a power cycle.



The last computed result remains valid until a new calculation is made to a relevant

instrument state is modified.

:CALCulate[1]:FEED “[:]SENSe[1]”

Feeds the data to the CALCulate[1] block.

Return



The string “SENS” is returned.

:CALCulate[1]:IMMediate

Instructs the counter to re-compute the current data without re-acquiring data.

This command will not affect:

:CALC2:LIM:FCO

:CALC2:LIM:PCO

:CALC3:…

Return



Results are formatted according to :FORMat[:DATA] ASCii|REAL setting.



When using ASCii format, numeric data is transferred as ASCII bytes in <NR3>

format. The number of significant digits will range from 1 to 15, depending on the

measurement resolution. Only significant digits will be returned.



If there is no valid result, error -230 will be generated and 9.91E37(Not A Number)

will be returned.



If Totalize or Voltage Peaks are chosen, error 0221 will be generated and

9.91E37(Not A Number) will be returned.

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 196 197

Comentarios a estos manuales

Sin comentarios

Bnc 1105 Universal Counter Manual de usuario Pagina 107

Comentarios a estos manuales

Relacionado con productos y manuales para Instrumentos de medición Bnc 1105 Universal Counter