
Resolution
<resolution> should use a mantissa of 1.0 and be an even
power of 10
<resolution>
Ch3
Default Value which indicates 4 digits of resolution for the specified
<expected value>
Range 1E-7 Hz ~ 1E7 Hz (15 to 3 digits of resolution)
Resolution
<resolution> should use a mantissa of 1.0 and be an even
power of 10
<source list> Default (@1)
Range (@1|@2|@3)
:MEASure[:SCALar][:VOLTage]:FREQuency:RATio?
[<expected_value> [,<resolution>]][,(@1),(@2)|(@1),(@3)|(@2),(@1)|(@3),(@1)]
Sets the measurement arming to “digits” and measures the frequency ratio between two inputs.
The <expected value> and <resolution> parameters are used to configure the number of digits
of resolution arming setting.
<expected value>
default 1
Range
Ch1/Ch2, Ch1/Ch3
1E-10 to 1E11
Range
Ch2/Ch1, Ch3/Ch1
1E-11 to 1E10
Resolution
<expected value> should be within
10% of ratio for optimum arming
configuration
<resolution>
Default
Value which indicates 4 digits of
resolution for the specified <expected
value>
Range
Ch1/Ch2, Ch1/Ch3
1E-25 ~ 1E8
(15 to 3 digits of resolution)
Range
Ch2/Ch1, Ch3/Ch1
1E-26 ~ 1E7
(15 to 3 digits of resolution)
Resolution
<resolution> should use a mantissa of
1.0 and be an even power of 10
<source list>
Default (@1,@2)
Range (@1,@2)|(@1,@3)|(@2,@1)|(@3,@1)
:MEASure[:SCALar][:VOLTage]:MAXimum? [(@1)|(@2)]
Measures voltage maximum.
Comentarios a estos manuales