Bnc 1105 Universal Counter Manual de usuario descargar pdf (Pagina 70)

7070

connected and interface is properly configured as described in Ch.5.1.

The SCPI commands available for the MODEL 1105 are listed below for

quick reference. Refer to Appendix C for detailed command syntax and

description. For the new users to apply SCPI commands, please refer to

Appendix C.1 for the introductory material on SCPI.

Note: The following conventions are used in SCPI command listing.

Triangle brackets (<>) indicates that users must specify a value for the

enclosed parameter. The square brackets ([]) indicates that the

parameter is optional and can be omitted. A vertical bar (|) separates

several options for a parameter.

<function> <parameters> [,source_list]

[:VOLTage]:FREQuency [<expected_value> [,<resolution>]] [(@1)|(@2)|(@3)]

[:VOLTage]:FREQuency:RATio [<expected_value> [,<resolution>]]

[(@1),(@2)|(@3)]|

[(@2)|(@3),(@1)]

[:VOLTage]:PERiod [<expected_value> [,<resolution>]] [(@1)|(@2)|(@3)]

[:VOLTage]:RISE:TIME

[:VOLTage]:RTIMe

[<lower_reference> [,upper_reference]]

[(@1)]

[:VOLTage]:FALL:TIME

[:VOLTage]:FTIMe

[<lower_reference> [,upper_reference]]

[(@1)]

[:VOLTage]:PWIDth [<reference>] [(@1)]

[:VOLTage]:NWIDth [<reference>] [(@1)]

[:VOLTage]:INITerval [(@1),(@2)]

[:VOLTage]:PTPeak [(@1),(@2)]

[:VOLTage]:MAXimum [(@1),(@2)]

[:VOLTage]:MINimum [(@1),(@2)]

[:VOLTage]:CENTer [(@1),(@2)]

[:VOLTage]:PHASe [(@1),(@2)]

[:VOLTage]:DCYCle

[:VOLTage]:PDUTycycle

[<reference>] [(@1)]

[:VOLTage]:TOTalize:CONTinuous

[(@1)]

[:VOLTage]:TOTalize:TIMed [<gate_time>] [(@1)]

Note: The command [:VOLTage]:TOTalize:CONTinuous is allowed with

CONFigure only.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 196 197

Sin comentarios

Bnc 1105 Universal Counter Manual de usuario Pagina 70