Bnc 1105 Universal Counter Manual de usuario Pagina 112

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 197
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 111
112
112112
112
If the current measurement function is Totalize or Voltage Peaks, a “0” will be
returned and error -221 will be generated.
:CALCulate2:LIMit:FCOunt:LOWer?
Queries the number of the measurement that fails the lower limit test.
Return
Numeric data transferred as ASCII bytes in <NR1> format.
Notes
If the limit test is off, a “0” will be returned and error -221 will be generated.
If there is no valid measurement result, a “0” will be returned and error -230 will be
generated.
If the current measurement function is Totalize or Voltage Peaks, a “0” will be
returned and error -221 will be generated.
:CALCulate2:LIMit:FCOunt[:TOTal]?
Queries the total number of the measurement that fails the limit test.
Return
Numeric data transferred as ASCII bytes in <NR1> format.
Notes
If the limit test is off, a “0” will be returned and error -221 will be generated.
If there is no valid measurement result, a “0” will be returned and error -230 will be
generated.
If the current measurement function is Totalize or Voltage Peaks, a “0” will be
returned and error -221 will be generated.
:CALCulate2:LIMit:FCOunt:UPPer?
Queries the number of the measurement that fails the upper limit test.
Return
Numeric data transferred as ASCII bytes in <NR1> format.
Notes
If the limit test is off, a “0” will be returned and error -221 will be generated.
If there is no valid measurement result, a “0” will be returned and error -230 will be
Vista de pagina 111
1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 196 197

Comentarios a estos manuales

Sin comentarios